Fuel Economy ECO OBD2 Driver
- Plug & play: no tools, wiring or app needed
- Fits the standard 16-pin OBD2 port (gasoline/benzine cars)
- Unplugs in seconds: fully reversible
- 30-day money-back guarantee
Bundle and save
In stock and ready to ship
Description
Overview:
OBD2 necessarily for cars:
- Sold after January 1st, 1996 in the USA
- Sold after January 1st, 2001 in the European Union
- With Benzine engine sold after January 1st, 2003
What does EcoOBD2 make?
According to your driving habits, EcoOBD2 makes new map in the car's computer ECU for the vehicle's lower fuel consumption. As you driving much more KM/Mile, EcoOBD2 renews the map and adjusts itself to match your car perfectly for more fuel saving.
What is EcoOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
EcoOBD2 Installation and Calibration steps:
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.
Specifications:
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Saving.
It works based OBD2 protocols as remaping the Car's computer ECU.
After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission.
Package Content:
1pc x EcoOBD2 Chip Tuning Box Interface
Actual Product Photo

How to use
Use the supplied instructions and confirm your vehicle’s compatibility before connecting. With the ignition off, connect the adapter to the OBD2 port. Turn the ignition to accessory mode without starting the engine, then follow the instructions to reset and wait for the indicated learning period before starting the engine.
Shipping and returns
Orders ship within 1–2 business days. Not happy? Return it within 30 days for a full refund.
Fuel Economy ECO OBD2 Driver
Why drivers choose ECO OBD2
Small device. Simple setup. Built for everyday driving.
Plug & play
Connects to your car's OBD2 port in seconds. No tools, wiring or app.
Adapts as you drive
Designed to read your car's ECU data and adjust to your driving habits over time.
Fully reversible
Nothing is cut, wired or permanently installed. Unplug it any time.
Risk-free for 30 days
Not right for your car? Return it within 30 days for a full refund.
Plug in. Drive. Done.
No garage visit, no wiring, no app. The ECO OBD2 Driver slips into your car's OBD2 port and gets to work as you drive.
- 1. Find your OBD2 portUsually under the dashboard, near the steering column.
- 2. Plug it inWith the engine off, push it in firmly until it sits flush.
- 3. Drive as usualFollow the included reset steps, then just drive. It learns your habits over the first trips.
Designed to adapt as you drive
Once connected, the ECO OBD2 Driver reads data from your car's computer (ECU) and builds a new fuel map around the way you actually drive.
- Reads your car's dataTalks to the ECU through the standard OBD2 port.
- Learns your driving styleAdjusts settings like fuel quantity and injection timing to match how you drive.
- Keeps improvingThe more you drive, the more it refines its map for your car.
Will it fit your car?
Most gasoline cars made in the last 20+ years have a standard OBD2 port. As a quick guide:
- USA: gasoline cars from 1996Cars sold after January 1, 1996 have an OBD2 port.
- EU: gasoline cars from 2001Cars sold after January 1, 2001 have an OBD2 (EOBD) port.
- Gasoline/benzine onlyThis version is not for diesel engines. Not sure? Check your owner's manual before ordering.
ECO OBD2 vs. the alternatives
The simplest way to change how your car uses fuel, without a garage bill.
| Feature | ECO OBD2 | ECU remap | Fuel additives |
|---|---|---|---|
| No tools or mechanic needed | Yes | No | Yes |
| One-time purchase | Yes | Yes | No |
| Remove it in seconds | Yes | No | No |
| Cost | $39.99 once | Varies by tuner | Ongoing, per bottle |
Questions, answered
Everything you need to know before you plug in.
Will it fit my car?
It plugs into the standard 16-pin OBD2 port found on most gasoline/benzine cars, usually under the dashboard near the steering column. This version is not for diesel vehicles. Check your make, model and year against the included instructions before ordering.
How long does shipping take?
Orders ship within 1–2 business days, and shipping is free on orders over $50. Your estimated delivery window is shown above the Add to cart button.
Which version is this?
This listing is for the gasoline/benzine version. Check the product instructions against your vehicle’s exact make, model, and year before ordering.
How should I get started?
Follow the supplied instructions. They direct you to connect with the ignition off, switch to accessory mode without starting the engine, then complete the instructed reset and wait before starting the engine.
What is included?
One ECO OBD2 adapter is included. Confirm your vehicle has a compatible OBD2 connection and check the port location in your vehicle manual or with a qualified mechanic.
What if it's not right for my car?
Every order is covered by our 30-day money-back guarantee. Not happy? Return it within 30 days for a full refund.